Featured Products
-
Fully Belted Loop FIBC Bag – “#” Bottom Loop Design
The “#” (hash) bottom loop layout employs parallel and perpendicular belts sewn to the base fabric in a grid-like pattern, with the belt ends forming the four lifting points. This arrangement strengthens the bag floor against sagging and is often selected for applications requiring stable palletized stacking and repeated handling cycles.
-
Type C Conductive FIBC Bag
Type C conductive bulk bags are constructed with interwoven conductive filaments or tapes that form a connected grid throughout the fabric. When a verified ground connection is attached to the bag’s designated grounding tab during filling and discharge, any accumulated electrostatic charge is safely directed to earth — a critical safety measure in environments where combustible dust clouds may form.
-
Top Fill Skirt FIBC Bag
The fill skirt (or duffle top) design extends a fabric collar above the main bag body that can be pulled over the filling spout and secured with ties. This enclosure helps contain airborne dust during loading and is commonly chosen for powders and granular products where spillage control at the fill station is a priority.
-
4 Cross Corner Loops FIBC Bag – Heavy-Duty Bulk Bag for Dry Bulk Materials
Cross corner loop FIBC bags use four lifting loops sewn diagonally across each corner seam, so the bag forms a natural cradle the moment it is hoisted. The load stays balanced, the loops sit clear of the filling opening, and the same bag can be handled by forklift, crane or overhead hoist. It is a widely used loop configuration for general dry bulk cargo in construction, agriculture and the chemical sector.
-
4 Side-Seam Loops FIBC Bag
Side-seam loop bulk bags place each lifting loop directly into the vertical side seams rather than spanning the corners. This design provides a clean, straight lift path and works well in automated filling lines where predictable bag geometry and consistent loop positioning are required.
-
Chinese Professional Cross Corner Loop FIBC Jumbo Big Bag with PE Liner
Loop sewn at four corners of bag, in reinforced areas.
-
Factory Sale 500kg or 1 ton bulk jumbo big for Japanese
Specially designed to meet the needs of the Japanese market.
-
Dangerous Goods Packaging Alumium Foil Pet Al PE Inner Liner Bag
Our PE Liner Bags offer good features that make them ideal for a variety of uses. These bags can be placed in FIBC bags, woven bags, or even on their own. Made of high good PE material, these bags are ideal for the demanding requirements of industrial use. Our bags are designed for good strength, durability and leak-proof performance, help your products are safe and secure.
-
8 Years Exporter Industry Use PP Jumbo FIBC Bulk Packing Bag Container Jumbo Bag
Generally, the cross corner ring is suitable for tubular bags and veneer bags. The two ends of each ribbon are sewn on two adjacent panels of the body. Each webbing crosses a corner, so it’s called cross corner loop. There are four belts on a giant bag at the corner.
Customers can ask to sew a reinforced on the bag body between the ribbon and the body.
If the bag is used to store powder, we can sew a layer of non-woven fabric between the bag body and the ribbon to prevent powder leakage.
-
Factory Hot 1500kg 1000kg Polypropylene Roll Woven Container PP FIBC Jumbo Bulk Ton Big Bag
These are our standard bags, in order to meet customer’s concern like one time use, try to save production cost, we have canceled the complete inspection, the defective product rate will be 1%-2%, please note. But we will make several bag inspections during each order, so this part of the production cost is saved.
-
ODM Supplier 20FT PP Woven Dry Bulk Container Liner for PE Resin Easy Loading and Unloading
Our PE Liner Bags offer good features that make them ideal for a variety of uses. These bags can be placed in FIBC bags, woven bags, or even on their own. Made of high strength PE material, these bags are ideal for the demanding requirements of industrial use.
-
Factory PP Woven Bag 1 Ton Bulk Bag FIBC Jumbo Bags for Sell
These are our standard bags, in order to meet customer’s concern like one time use, try to save production cost, we have canceled the complete inspection, the defective product rate will be 1%-2%, please note. But we will make several bag inspections during each order, so this part of the production cost is saved.